MM to Inches: Formula, Fraction Chart and Examples

MM to Inches: Formula and fraction chart
Spread the love

Millimetres are the go-to unit for precise measurements: screws, drill bits, jewellery, camera lenses and phone thickness. Inches still rule hardware stores and plans in the US. Converting between them is exact: one inch is 25.4 millimetres.

Quick answer

  • 1 mm = 0.03937 inches
  • 1 inch = 25.4 mm (exact)
  • Divide millimetres by 25.4 to get inches. Multiply inches by 25.4 to get millimetres.

The mm to inches formula

inches = millimetres ÷ 25.4

The inch has been defined as exactly 25.4 mm since 1959 (see NIST Handbook 44, Appendix C), so the result is as precise as your measurement.

Worked examples

  • 5 mm ÷ 25.4 = 0.197 in
  • 10 mm ÷ 25.4 = 0.394 in
  • 12 mm ÷ 25.4 = 0.472 in
  • 20 mm ÷ 25.4 = 0.787 in
  • 50 mm ÷ 25.4 = 1.969 in

Millimetres to inches chart

Millimetres Inches (decimal)
1 mm 0.039 in
2 mm 0.079 in
3 mm 0.118 in
4 mm 0.157 in
5 mm 0.197 in
6 mm 0.236 in
8 mm 0.315 in
10 mm 0.394 in
12 mm 0.472 in
15 mm 0.591 in
20 mm 0.787 in
25 mm 0.984 in
30 mm 1.181 in
40 mm 1.575 in
50 mm 1.969 in
75 mm 2.953 in
100 mm 3.937 in
150 mm 5.906 in
200 mm 7.874 in
300 mm 11.811 in

Inch fractions to millimetres

Tools, sockets and drill bits are often sized in fractions of an inch. This chart gives the exact metric equivalents.

Fraction Decimal inches Millimetres
1/16″ 0.0625 1.59 mm
1/8″ 0.1250 3.18 mm
3/16″ 0.1875 4.76 mm
1/4″ 0.2500 6.35 mm
5/16″ 0.3125 7.94 mm
3/8″ 0.3750 9.52 mm
7/16″ 0.4375 11.11 mm
1/2″ 0.5000 12.70 mm
5/8″ 0.6250 15.88 mm
3/4″ 0.7500 19.05 mm
7/8″ 0.8750 22.22 mm
1″ 1.0000 25.40 mm

How to convert inches to mm

millimetres = inches × 25.4. For example, 3/8″ = 0.375 × 25.4 = 9.525 mm, and 2.5″ = 63.5 mm.

Turning a decimal into the nearest fraction

Most US rulers are marked in sixteenths. Multiply the decimal part of your answer by 16 and round to the nearest whole number. For 10 mm: 10 ÷ 25.4 = 0.394 in, and 0.394 × 16 ≈ 6.3, so 10 mm is just over 6/16 (3/8) of an inch.

Tip for tools: metric and imperial sizes are rarely exact matches. A 10 mm socket (0.394″) is close to a 3/8″ socket (0.375″) but not the same, so using the wrong one can round off a bolt head.

Common mistakes

  • Confusing mm and cm. 1 inch = 25.4 mm = 2.54 cm. If your answer is ten times too big or small, check the unit.
  • Assuming close sizes are interchangeable. 6 mm (0.236″) isn’t quite 1/4″ (0.25″).
  • Rounding too early. Keep three decimals in inches for anything that has to fit.

Frequently asked questions

How many mm are in an inch?

Exactly 25.4 millimetres.

What is 1 mm in inches?

About 0.0394 inches, a little more than 1/32 of an inch (0.03125″).

Is 1/4 inch the same as 6 mm?

Not quite. 1/4 inch is 6.35 mm. For loose fits they’re interchangeable; for precise parts they aren’t.

How do I measure millimetres without a metric ruler?

Measure in inches and multiply by 25.4. For example, a 1 1/2″ width is 1.5 × 25.4 = 38.1 mm.

Related conversions

Related guides

Leave a Reply

Your email address will not be published. Required fields are marked *