|

Percent Error Formula (and Percent Difference), With Examples

Percent Error Formula: Plus percent difference
Spread the love

In science labs and quality checks, you often compare a measured value with an accepted one. Percent error tells you how far off you were, as a percentage of the true value.

Quick answer

Percent error = |measured − true| ÷ true × 100

The vertical bars mean “absolute value”: ignore any minus sign. Example: you measure gravity as 9.6 m/s² when the accepted value is 9.81 m/s². |9.6 − 9.81| ÷ 9.81 × 100 = 2.14%.

Step by step

  1. First, subtract the true value from the measured value: 9.6 − 9.81 = −0.21.
  2. Then take the absolute value: 0.21.
  3. Next, divide by the true value: 0.21 ÷ 9.81 = 0.0214.
  4. Finally, multiply by 100: 2.14%.

More examples

Measured True value Percent error
98 100 2.00%
2.45 2.5 2.00%
0.52 0.5 4.00%
1020 1000 2.00%
27.3 26.98 1.19%

Percent difference

When neither value is “true” (for example, two students’ measurements), use percent difference, which divides by the average of the two:

Percent difference = |a − b| ÷ ((a + b) ÷ 2) × 100

For 48 and 52: |48 − 52| ÷ 50 × 100 = 8%.

Which formula when?

Formula Use when Divide by
Percent error Comparing a measurement with an accepted value The true value
Percent difference Comparing two values with no reference Their average
Percent change A value changes over time The old value

For changes over time, see the percent change formula.

Signed percent error

Some teachers want the sign kept, to show whether you measured high (+) or low (−). In that case skip the absolute value: (9.6 − 9.81) ÷ 9.81 × 100 = −2.14%, meaning the measurement was low.

Frequently asked questions

What is the percent error formula?

|measured − true| ÷ true × 100.

Can percent error be negative?

Not with the absolute value; if your teacher uses the signed version, a negative means the measurement was low.

What is a good percent error?

It depends on the experiment; in many school labs, under about 5% is considered good.

What’s the difference between percent error and percent difference?

Percent error compares with a true value; percent difference compares two values using their average.

Related guides

Related guides

Leave a Reply

Your email address will not be published. Required fields are marked *